Eagtac T25V XHP70.2 (2020) review
The Eagtac T25V XHP70.2 (T25VXHP702) released in 2020. It uses Cree XHP70.2 LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 3200 lm output, 11449 cd intensity, and a beam distance of 214 m.
This light has 3 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The T25V XHP70.2 flashlight is rechargeable easily via USB port.
Table of contents:
Eagtac T25V XHP70.2 (T25VXHP702) specifications
- T25V XHP70.2
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 117 g
- 155.9 mm
- Body diameter
- 25.4 mm
- Head diameter
- 33 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of T25V XHP70.2 manufactured by Cree, a US-based LED manufacturing company. The T25V XHP70.2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XHP70.2 LED
- Color temperature
- 5000 K, 6500 K
- toughtened AR coated glass
- mechanical rear, rotary front
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 3200 lm
- 11449 cd
- 214 m
- CD/LM factor
The T25V XHP70.2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The T25V XHP70.2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 3 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- USB Type-C
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your T25V XHP70.2. The package includes a holster to safely store your flashlight. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 21700 battery
USB Type-C cable
The performance of the Eagtac T25V XHP70.2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Eagtac T25V XHP70.2, then don’t hesite and signal the problem to us.
Eagtac T25V XHP70.2 (T25VXHP702) pictures
If there’s information about the Eagtac T25V XHP70.2 that you would like to see on this site, then write to our firstname.lastname@example.org address.