Convoy Z1 (2020) review
The Convoy Z1 (Z1) released in 2020. It uses Luminus SST40 LED, no reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 2300 lm output, 5625 cd intensity, and a beam distance of 150 m.
This light has 4 modes of lighting. This light does not have memory function.
Table of contents:
Convoy Z1 (Z1) specifications
- Brand
- Convoy
- Name
- Z1
- Type
- Z1
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 209 g
- Length
- 149.5 mm
- Body diameter
- 28.2 mm
- Head diameter
- 52 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of Z1 manufactured by Luminus, a US-based LED manufacturer.
- Emitter
- Luminus SST40 LED
- Color temperature
- 5000 K, 6500 K
- Reflector
- no
- Lens
- convex
- Switch
- mechanical rear, reverse clicky
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 2300 lm
- Intensity
- 5625 cd
- Throw
- 150 m
- CD/LM factor
- 2.45
Software
- Modes
- 4 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The Z1 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 21700 Li-Ion battery
- Battery indicator
- no
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx4
- Impact resistance
- 1 m
- AUX LEDs
- no
- Magnetic
- no
- Specials
- zoomable
Accessories
The lanyard prevents accidental loss of the flashlight.
- Package contents
- lanyard
The performance of the Convoy Z1 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Convoy Z1, then don’t hesite and signal the problem to us.
Convoy Z1 (Z1) pictures
If there’s information about the Convoy Z1 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.