
Convoy M3 XHP70.2 (2019) review
The Convoy M3 XHP70.2 (M3XHP702) released in 2019. It uses Cree XHP70.2 LED, OP reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 4300 lm output, 32000 cd intensity, and a beam distance of 358 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Convoy M3 XHP70.2 (M3XHP702) specifications
- Brand
- Convoy
- Name
- M3 XHP70.2
- Type
- M3XHP702
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 290 g
- Length
- 149 mm
- Body diameter
- 35.6 mm
- Head diameter
- 48 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of M3 XHP70.2 manufactured by Cree, a US-based LED manufacturing company. The M3 XHP70.2 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Emitter
- Cree XHP70.2 LED
- Color temperature
- 3000 K, 4000 K, 5000 K, 6500 K
- Reflector
- OP
- Lens
- AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 4300 lm
- Intensity
- 32000 cd
- Throw
- 358 m
- CD/LM factor
- 7.44
Software
The M3 XHP70.2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The M3 XHP70.2 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 26650 Li-Ion battery
- Battery indicator
- no
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- AUX LEDs
- no
- Magnetic
- no
The performance of the Convoy M3 XHP70.2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Convoy M3 XHP70.2, then don’t hesite and signal the problem to us.
Convoy M3 XHP70.2 (M3XHP702) pictures

If there’s information about the Convoy M3 XHP70.2 that you would like to see on this site, then write to us.