FlashlightChart.com / Flashlights / Convoy / Convoy S11 SST40 (2019)

Convoy S11 SST40 (2019) review

2019
Luminus SST40 LED
2300 lm output
12100 cd intensity
1 x 26650 Li-Ion battery

The Convoy S11 SST40 (S11SST40) released in 2019. It uses Luminus SST40 LED, SMO reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2300 lm output, 12100 cd intensity, and a beam distance of 220 m.

This light has 4/12 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.

Table of contents:

Convoy S11 SST40 (S11SST40) specifications

Brand
Convoy
Name
S11 SST40
Type
S11SST40
Rating
Rated 3/5 based on 156 user votes.
Thanks for rating!
Invalid rating.
Launch
2019
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
171 g
Length
139 mm
Body diameter
33 mm
Head diameter
33 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black
blue
sand
silver
titanium

System

The emitter of S11 SST40 manufactured by Luminus, a US-based LED manufacturer. The S11 SST40 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

Emitter
Luminus SST40 LED
Color temperature
5000 K, 6500 K
Reflector
SMO
Lens
AR coated glass
Switch
mechanical rear, forward clicky

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
2300 lm
Intensity
12100 cd
Throw
220 m
CD/LM factor
5.26

Software

The S11 SST40 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.

Modes
4/12 modes
Mode memory
yes
Ramping mode
no
Strobe
no
SOS/Beacon
no

Features

The S11 SST40 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
1 x 26650 Li-Ion battery
Battery indicator
no
Charger port
no
LVP
yes
Thermal regulation
yes
Protection
IPx7
AUX LEDs
no
Magnetic
no

Accessories

The lanyard prevents accidental loss of the flashlight.

Package contents
lanyard

The performance of the Convoy S11 SST40 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Convoy S11 SST40, then don’t hesite and signal the problem to us.

Convoy S11 SST40 (S11SST40) pictures

If there’s information about the Convoy S11 SST40 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information