FlashlightChart.com / Flashlights / Amutorch / Amutorch XT45 SBT90.2 (2020)

Amutorch XT45 SBT90.2 (2020) review

2020
Luminus SBT90.2 LED
5700 lm output
140000 cd intensity
1 x 21700 Li-Ion battery

The Amutorch XT45 SBT90.2 (XT45SBT902) released in 2020. It uses Luminus SBT90.2 LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 5700 lm output, 140000 cd intensity, and a beam distance of 748 m.

This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.

Table of contents:

Amutorch XT45 SBT90.2 (XT45SBT902) specifications

Brand
Amutorch
Name
XT45 SBT90.2
Type
XT45SBT902
Rating
Rated 4/5 based on 169 user votes.
Thanks for rating!
Invalid rating.
Launch
2020
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
163 g
Length
141 mm
Body diameter
26 mm
Head diameter
45 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black
gray

System

The emitter of XT45 SBT90.2 manufactured by Luminus, a US-based LED manufacturer. The XT45 SBT90.2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

Emitter
Luminus SBT90.2 LED
Color temperature
5700 K
Reflector
SMO
Lens
toughtened AR coated glass
Switch
mechanical rear, forward clicky

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
5700 lm
Intensity
140000 cd
Throw
748 m
CD/LM factor
24.56

Software

The XT45 SBT90.2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.

Modes
5 modes
Mode memory
yes
Ramping mode
no
Strobe
no
SOS/Beacon
no

Features

The XT45 SBT90.2 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
1 x 21700 Li-Ion battery
Battery indicator
no
Charger port
no
LVP
yes
Thermal regulation
yes
Protection
IPx8
AUX LEDs
no
Magnetic
no

The performance of the Amutorch XT45 SBT90.2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Amutorch XT45 SBT90.2, then don’t hesite and signal the problem to us.

Amutorch XT45 SBT90.2 (XT45SBT902) pictures

If there’s information about the Amutorch XT45 SBT90.2 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information