Amutorch X10 SST40 (2020) review
The Amutorch X10 SST40 (X10SST40) released in 2020. It uses Luminus SST40 LED, SMO reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2000 lm output, 62500 cd intensity, and a beam distance of 500 m.
This light has 3 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Amutorch X10 SST40 (X10SST40) specifications
- X10 SST40
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 162 g
- 132 mm
- Body diameter
- 32 mm
- Head diameter
- 43 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of X10 SST40 manufactured by Luminus, a US-based LED manufacturer. The X10 SST40 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Luminus SST40 LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 2000 lm
- 62500 cd
- 500 m
- CD/LM factor
The X10 SST40 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The X10 SST40 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 3 modes
- Mode memory
- Ramping mode
The X10 SST40 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- 1 x 26650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The lanyard prevents accidental loss of the flashlight.
- Package contents
The performance of the Amutorch X10 SST40 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Amutorch X10 SST40, then don’t hesite and signal the problem to us.
Amutorch X10 SST40 (X10SST40) pictures
If there’s information about the Amutorch X10 SST40 that you would like to see on this site, then write to our firstname.lastname@example.org address.