FlashlightChart.com / Flashlights / Amutorch / Amutorch E3S (2020)

Amutorch E3S (2020) review

2020
3 x Luminus SST20 LEDs
3000 lm output
19460 cd intensity
1 x 20350 Li-Ion battery

The Amutorch E3S (E3S) released in 2020. It uses 3 x Luminus SST20 LEDs, TIR reflector and 1 x 20350 Li-Ion battery. The powerful emitter in this flashlight provides up to 3000 lm output, 19460 cd intensity, and a beam distance of 279 m.

It uses a TIR lens to form the beam pattern. This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Amutorch E3S (E3S) specifications

Brand
Amutorch
Name
E3S
Type
E3S
Rating
Rated 3/5 based on 214 user votes.
Thanks for rating!
Invalid rating.
Launch
2020
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
80 g
Length
58.8 mm
Body diameter
25.4 mm
Head diameter
29 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black
bronze

System

The emitter of E3S manufactured by Luminus, a US-based LED manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.

Emitter
3 x Luminus SST20 LEDs
Color temperature
4000 K, 5000 K, 6500 K
Reflector
TIR
Lens
TIR
Switch
electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
3000 lm
Intensity
19460 cd
Throw
279 m
CD/LM factor
6.49

Software

The E3S has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The E3S is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.

Modes
4 modes
Mode memory
yes
Ramping mode
no
Strobe
yes
SOS/Beacon
yes

Features

The E3S cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
1 x 20350 Li-Ion battery
Battery indicator
no
Charger port
no
LVP
yes
Thermal regulation
yes
Protection
IPx8
Impact resistance
1 m
AUX LEDs
no
Magnetic
no

Accessories

Package contents
key ring

The performance of the Amutorch E3S flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Amutorch E3S, then don’t hesite and signal the problem to us.

Amutorch E3S (E3S) pictures

If there’s information about the Amutorch E3S that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information