Thrunite TN50 (2019) review
The Thrunite TN50 (TN50) released in 2019. It uses 4 x Cree XHP70.2 LEDs, SMO reflector and 4 x 21700 Li-Ion batteries. The powerful emitter in this flashlight provides up to 16340 lm output, 42000 cd intensity, and a beam distance of 410 m.
This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Thrunite TN50 (TN50) specifications
- Brand
- Thrunite
- Name
- TN50
- Type
- TN50
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 650 g
- Length
- 134.5 mm
- Body diameter
- 58 mm
- Head diameter
- 68 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of TN50 manufactured by Cree, a US-based LED manufacturing company. The TN50 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- 4 x Cree XHP70.2 LEDs
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 16340 lm
- Intensity
- 42000 cd
- Throw
- 410 m
- CD/LM factor
- 2.57
Software
The TN50 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TN50 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 6 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 4 x 21700 Li-Ion batteries
- Battery indicator
- yes
- Charger port
- yes
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The package includes a holster to safely store your flashlight.
- Package contents
- 2 x spare o-rings
nylon holster
spare dust plug
wall adapter
The performance of the Thrunite TN50 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite TN50, then don’t hesite and signal the problem to us.
Thrunite TN50 (TN50) pictures
If there’s information about the Thrunite TN50 that you would like to see on this site, then write to us.