
Sofirn Q8 Pro (2021) review
The Sofirn Q8 Pro (Q8 Pro) released in 2021. It uses 4 x Cree XHP50.2 LEDs, SMO reflector and 4 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 11000 lm output, 430336 cd intensity, and a beam distance of 1312 m.
The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The Q8 Pro flashlight is rechargeable easily via USB port.
Table of contents:
Sofirn Q8 Pro (Q8 Pro) specifications
- Brand
- Sofirn
- Name
- Q8 Pro
- Type
- Q8 Pro
- Rating
- Launch
- 2021
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 408 g
- Length
- 134 mm
- Body diameter
- 50 mm
- Head diameter
- 59 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of Q8 Pro manufactured by Cree, a US-based LED manufacturing company. The Q8 Pro has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- 4 x Cree XHP50.2 LEDs
- Color temperature
- 5000 K, 6500 K
- Reflector
- SMO
- Lens
- AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 11000 lm
- Intensity
- 430336 cd
- Throw
- 1312 m
- CD/LM factor
- 39.12
Software
The Q8 Pro has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the Q8 Pro is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The Q8 Pro is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Firmware
- Anduril
- Mode memory
- yes
- Ramping mode
- yes
- Strobe
- yes
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The Q8 Pro flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- Battery
- 4 x 18650 Li-Ion batteries
- Battery indicator
- yes
- Charger port
- USB Type-C
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- Impact resistance
- 1 m
- AUX LEDs
- no
- Magnetic
- no
- Specials
- powerbank function
Accessories
- Package contents
- 3 x spare o-rings
USB Type-C cable
spare rubber cover
The performance of the Sofirn Q8 Pro flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Sofirn Q8 Pro, then don’t hesite and signal the problem to us.
Sofirn Q8 Pro (Q8 Pro) pictures

If there’s information about the Sofirn Q8 Pro that you would like to see on this site, then write to us.