
Sofirn SP33 v3 (2019) review
The Sofirn SP33 v3 (SP33V3) released in 2019. It uses Cree XHP50.2 LED, OP reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 3500 lm output, 18632 cd intensity, and a beam distance of 273 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The SP33 v3 flashlight is rechargeable easily via USB port.
Table of contents:
Sofirn SP33 v3 (SP33V3) specifications
- Brand
- Sofirn
- Name
- SP33 v3
- Type
- SP33V3
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 144 g
- Length
- 126.6 mm
- Head diameter
- 37.5 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of SP33 v3 manufactured by Cree, a US-based LED manufacturing company. The SP33 v3 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Emitter
- Cree XHP50.2 LED
- Color temperature
- 5000 K
- Reflector
- OP
- Lens
- toughtened AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 3500 lm
- Intensity
- 18632 cd
- Throw
- 273 m
- CD/LM factor
- 5.32
Software
The SP33 v3 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the SP33 v3 is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The SP33 v3 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- yes
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 26650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- USB Type-C
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 adapter
USB Type-C cable
lanyard
The performance of the Sofirn SP33 v3 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Sofirn SP33 v3, then don’t hesite and signal the problem to us.
Sofirn SP33 v3 (SP33V3) pictures

If there’s information about the Sofirn SP33 v3 that you would like to see on this site, then write to us.