Olight S2R Baton II (2019) review
The Olight S2R Baton II (S2RBATONII) released in 2019. It uses Luminus SST40 LED, TIR reflector and 1 x special 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1150 lm output, 4600 cd intensity, and a beam distance of 136 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The S2R Baton II flashlight is rechargeable easily via USB port.
Table of contents:
Olight S2R Baton II (S2RBATONII) specifications
- Brand
- Olight
- Name
- S2R Baton II
- Type
- S2RBATONII
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 98.5 g
- Length
- 100 mm
- Body diameter
- 23 mm
- Head diameter
- 23 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
copper
desert tan
green
purple
System
The emitter of S2R Baton II manufactured by Luminus, a US-based LED manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- Luminus SST40 LED
- Color temperature
- 6500 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1150 lm
- Intensity
- 4600 cd
- Throw
- 136 m
- CD/LM factor
- 4
- CRI
- 70
Software
The S2R Baton II has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The S2R Baton II is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature. The S2R Baton II is magnetic so that the flashlight can be attached to some metallic surfaces.
- Battery
- 1 x special 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- magnetic USB
- LVP
- no
- Thermal regulation
- no
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- yes
Accessories
It comes with a battery. The battery must be fully charged before you first use your S2R Baton II. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- MCC1A magnetic USB charger cable
clip
lanyard
pouch
special 18650 battery
The performance of the Olight S2R Baton II flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Olight S2R Baton II, then don’t hesite and signal the problem to us.
Olight S2R Baton II (S2RBATONII) pictures
If there’s information about the Olight S2R Baton II that you would like to see on this site, then write to our webmaster@flashlightchart.com address.