Olight S1 Mini Baton HCRI (2017) review
The Olight S1 Mini Baton HCRI (S1MINIBATONH) released in 2017. It uses Cree XM-L2 LED, TIR reflector and 1 x RCR123A Li-Ion battery. The powerful emitter in this flashlight provides up to 450 lm output, 4200 cd intensity, and a beam distance of 130 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Olight S1 Mini Baton HCRI (S1MINIBATONH) specifications
- S1 Mini Baton HCRI
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 43 g
- 54 mm
- Body diameter
- 21 mm
- Head diameter
- 21 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of S1 Mini Baton HCRI manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Cree XM-L2 LED
- Color temperature
- 5000 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 450 lm
- 4200 cd
- 130 m
- CD/LM factor
The S1 Mini Baton HCRI has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The S1 Mini Baton HCRI is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 5 modes
- Mode memory
- Ramping mode
The S1 Mini Baton HCRI cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature. The S1 Mini Baton HCRI is magnetic so that the flashlight can be attached to some metallic surfaces.
- 1 x RCR123A Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your S1 Mini Baton HCRI. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- RCR123A battery with microUSB
The performance of the Olight S1 Mini Baton HCRI flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Olight S1 Mini Baton HCRI, then don’t hesite and signal the problem to us.
Olight S1 Mini Baton HCRI (S1MINIBATONH) pictures
If there’s information about the Olight S1 Mini Baton HCRI that you would like to see on this site, then write to us.