Olight Perun 2 (2020) review
The Olight Perun 2 (PERUN2) released in 2020. It uses unspecified LED, TIR reflector and 1 x special 21700 Li-Ion battery. The powerful emitter in this headlamp provides up to 2500 lm output, 6889 cd intensity, and a beam distance of 166 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The Perun 2 flashlight is rechargeable easily via USB port.
Table of contents:
Olight Perun 2 (PERUN2) specifications
- Perun 2
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 161 g
- 120.7 mm
- Body diameter
- 27 mm
- Head diameter
- 28.6 mm
- aluminium alloy with HAIII hard-anodized finish
A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- unspecified LED
- Color temperature
- 6000 K
- electronic front
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 2500 lm
- 6889 cd
- 166 m
- CD/LM factor
The Perun 2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. A protected battery is recommended as the light itself does not have low voltage protection (LVP). The built-in thermal control automatically adjusts brightness output to prevent overheating. The Perun 2 is magnetic so that the flashlight can be attached to some metallic surfaces.
- 1 x special 21700 Li-Ion battery
- Battery indicator
- yes, with vibration
- Charger port
- magnetic USB
- Thermal regulation
- Impact resistance
- 1.5 m
- AUX LEDs
- proximity sensor
It comes with a battery. The battery must be fully charged before you first use your Perun 2. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- MCC3 magnetic USB charger cable
special 21700 battery
The performance of the Olight Perun 2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Olight Perun 2, then don’t hesite and signal the problem to us.
Olight Perun 2 (PERUN2) pictures
If there’s information about the Olight Perun 2 that you would like to see on this site, then write to us.