FlashlightChart.com / Flashlights / Nextorch / Nextorch TA10 (2016)

Nextorch TA10 (2016) review

2016
Cree XP-L HD LED
560 lm output
7225 cd intensity
1 x 14500 Li-Ion or 1 x AA NiMH battery

The Nextorch TA10 (TA10) released in 2016. It uses Cree XP-L HD LED, SMO reflector and 1 x 14500 Li-Ion or 1 x AA NiMH battery. The powerful emitter in this flashlight provides up to 560 lm output, 7225 cd intensity, and a beam distance of 170 m.

This light has 3 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Nextorch TA10 (TA10) specifications

Brand
Nextorch
Name
TA10
Type
TA10
Rating
Rated 3/5 based on 128 user votes.
Thanks for rating!
Invalid rating.
Launch
2016
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
89 g
Length
122 mm
Body diameter
22 mm
Head diameter
29.2 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black

System

The emitter of TA10 manufactured by Cree, a US-based LED manufacturing company. The TA10 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

Emitter
Cree XP-L HD LED
Color temperature
6500 K
Reflector
SMO
Lens
toughtened AR coated glass
Switch
mechanical rear

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
560 lm
Intensity
7225 cd
Throw
170 m
CD/LM factor
12.9

Software

The TA10 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.

Modes
3 modes
Mode memory
no
Ramping mode
no
Strobe
yes
SOS/Beacon
yes

Features

The TA10 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.

Battery
1 x 14500 Li-Ion or 1 x AA NiMH battery
Battery indicator
no
Charger port
no
LVP
no
Thermal regulation
no
Protection
IPx8
AUX LEDs
no
Magnetic
no

Accessories

The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.

Package contents
2 x spare o-rings
clip
lanyard

The performance of the Nextorch TA10 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nextorch TA10, then don’t hesite and signal the problem to us.

Nextorch TA10 (TA10) pictures

If there’s information about the Nextorch TA10 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information