Nextorch Saint Torch 11 (2018) review
The Nextorch Saint Torch 11 (ST11) released in 2018. It uses Cree XHP70.2 LED, OP reflector and 4 x 2600 mAh battery pack. The powerful emitter in this flashlight provides up to 3500 lm output, 90000 cd intensity, and a beam distance of 600 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The Saint Torch 11 flashlight is rechargeable easily via USB port.
Table of contents:
Nextorch Saint Torch 11 (ST11) specifications
- Brand
- Nextorch
- Name
- Saint Torch 11
- Type
- ST11
- Rating
- Launch
- 2018
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 790 g
- Length
- 212 mm
- Body diameter
- 50 mm
- Head diameter
- 83 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of Saint Torch 11 manufactured by Cree, a US-based LED manufacturing company. The Saint Torch 11 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Emitter
- Cree XHP70.2 LED
- Color temperature
- 5000 K
- Reflector
- OP
- Lens
- toughtened AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 3500 lm
- Intensity
- 90000 cd
- Throw
- 600 m
- CD/LM factor
- 25.71
Software
The Saint Torch 11 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The Saint Torch 11 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The Saint Torch 11 flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- Battery
- 4 x 2600 mAh battery pack
- Battery indicator
- yes
- Charger port
- USB Type-C
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
- Specials
- powerbank function
Accessories
- Package contents
- USB Type-C cable
nylon bag
shoulder strap
wall adapter
The performance of the Nextorch Saint Torch 11 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nextorch Saint Torch 11, then don’t hesite and signal the problem to us.
Nextorch Saint Torch 11 (ST11) pictures
If there’s information about the Nextorch Saint Torch 11 that you would like to see on this site, then write to us.