Manker U22 III Osram (2021) review
The Manker U22 III Osram (U22IIIO) released in 2021. It uses Osram KW CSLPM1.TG LED, TIR reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 1500 lm output, 250000 cd intensity, and a beam distance of 1000 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The U22 III Osram flashlight is rechargeable easily via USB port.
Table of contents:
Manker U22 III Osram (U22IIIO) specifications
- U22 III Osram
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 175 g
- 134.4 mm
- Body diameter
- 28 mm
- Head diameter
- 52.2 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of U22 III Osram manufactured by Osram, a German lighting manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Osram KW CSLPM1.TG LED
- Color temperature
- 6500 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1500 lm
- 250000 cd
- 1000 m
- CD/LM factor
The U22 III Osram has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The U22 III Osram is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The U22 III Osram flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- USB Type-C
- Thermal regulation
- Impact resistance
- 1 m
- AUX LEDs
- powerbank function
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- USB Type-C OTG cable
The performance of the Manker U22 III Osram flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker U22 III Osram, then don’t hesite and signal the problem to us.
Manker U22 III Osram (U22IIIO) pictures
If there’s information about the Manker U22 III Osram that you would like to see on this site, then write to our firstname.lastname@example.org address.