Manker TC02 XP-G3 (2019) review
The Manker TC02 XP-G3 (TC02XPG3) released in 2019. It uses Cree XP-G3 LED, TIR reflector and 1 x 14200 Li-Ion battery. The powerful emitter in this flashlight provides up to 150 lm output, 300 cd intensity, and a beam distance of 35 m.
It uses a TIR lens to form the beam pattern. This light has 3 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The TC02 XP-G3 flashlight is rechargeable easily via USB port.
Table of contents:
Manker TC02 XP-G3 (TC02XPG3) specifications
- TC02 XP-G3
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 16.6 g
- 37.4 mm
- Head diameter
- 18 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of TC02 XP-G3 manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Cree XP-G3 LED
- Color temperature
- 6000 K
- touch switch
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 150 lm
- 300 cd
- 35 m
- CD/LM factor
The TC02 XP-G3 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- 3 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- 1 x 14200 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- Package contents
- key ring
The performance of the Manker TC02 XP-G3 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker TC02 XP-G3, then don’t hesite and signal the problem to us.
Manker TC02 XP-G3 (TC02XPG3) pictures
If there’s information about the Manker TC02 XP-G3 that you would like to see on this site, then write to us.