Lumintop OD10 (2020) review
The Lumintop OD10 (OD10) released in 2020. It uses Cree XP-L HD LED, OP reflector and 1 x 18350 Li-Ion battery. The powerful emitter in this flashlight provides up to 680 lm output, 3250 cd intensity, and a beam distance of 114 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Lumintop OD10 (OD10) specifications
| Brand | Lumintop |
|---|---|
| Name | OD10 |
| Type | OD10 |
| Rating | |
| Launch | 2020 |
| Form | flashlight |
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
| Weight | 27 g |
|---|---|
| Length | 69 mm |
| Body diameter | 22 mm |
| Head diameter | 23 mm |
| Material | aluminium alloy with HAIII hard-anodized finish |
| Colors | black |
System
The emitter of OD10 manufactured by Cree, a US-based LED manufacturing company. The OD10 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
| Emitter | Cree XP-L HD LED |
|---|---|
| Reflector | OP |
| Lens | AR coated glass |
| Switch | electronic side |
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
| Flux | 680 lm |
|---|---|
| Intensity | 3250 cd |
| Throw | 114 m |
| CD/LM factor | 4.78 |
Software
The OD10 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The OD10 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
| Modes | 4 modes |
|---|---|
| Mode memory | yes |
| Ramping mode | no |
| Strobe | yes |
| SOS/Beacon | yes |
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. The OD10 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The OD10 is magnetic so that the flashlight can be attached to some metallic surfaces.
| Battery | 1 x 18350 Li-Ion battery |
|---|---|
| Battery indicator | yes |
| Charger port | no |
| LVP | yes |
| Thermal regulation | yes |
| Protection | IP65 |
| AUX LEDs | no |
| Magnetic | yes |
Accessories
The clip is useful to keep the light secured in your pocket.
| Package contents | 2 x spare o-rings clip |
|---|
The performance of the Lumintop OD10 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Lumintop OD10, then don’t hesite and signal the problem to us.
Lumintop OD10 (OD10) pictures
Lumintop OD10 (OD10) comparisons
According to our statistics, the Lumintop OD10 flashlight was most often compared on our site with the following flashlights.
Lumintop OD10
Olight Warrior 3S
Lumintop OD10
Olight Warrior X 3
Acebeam X10
Lumintop OD10
Sofirn SP36 Anduril
Lumintop OD10
If there’s information about the Lumintop OD10 that you would like to see on this site, then write to us.