Lumintop GLOW I (2020) review
The Lumintop GLOW I (GLOWI) released in 2020. It uses Osram LED, TIR reflector and integrated 10180 Li-Ion battery. The powerful emitter in this flashlight provides up to 40 lm output, 120 cd intensity, and a beam distance of 22 m.
It uses a TIR lens to form the beam pattern. The GLOW I flashlight is rechargeable easily via USB port.
Table of contents:
Lumintop GLOW I (GLOWI) specifications
- GLOW I
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 16.1 g
- 47.4 mm
- Body diameter
- 12.1 mm
- Head diameter
- 14.5 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of GLOW I manufactured by Osram, a German lighting manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Osram LED
- Color temperature
- 5000 K
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 40 lm
- 120 cd
- 22 m
- CD/LM factor
- Ramping mode
This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature. The GLOW I is magnetic so that the flashlight can be attached to some metallic surfaces.
- integrated 10180 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- glow in the dark
- Package contents
- 2 x spare o-rings
The performance of the Lumintop GLOW I flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Lumintop GLOW I, then don’t hesite and signal the problem to us.
Lumintop GLOW I (GLOWI) pictures
If there’s information about the Lumintop GLOW I that you would like to see on this site, then write to our firstname.lastname@example.org address.