Lumintop FW1A XPL (2019) review
The Lumintop FW1A XPL (FW1AX) released in 2019. It uses Cree XP-L HI LED, OP reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1200 lm output, 34130 cd intensity, and a beam distance of 369 m.
The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Lumintop FW1A XPL (FW1AX) specifications
- FW1A XPL
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 57 g
- 100.8 mm
- Body diameter
- 25.5 mm
- Head diameter
- 25.5 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of FW1A XPL manufactured by Cree, a US-based LED manufacturing company. The FW1A XPL has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Cree XP-L HI LED
- Color temperature
- 5000 K
- AR coated glass
- electronic rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1200 lm
- 34130 cd
- 369 m
- CD/LM factor
The FW1A XPL has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the FW1A XPL is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The FW1A XPL is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Mode memory
- Ramping mode
The FW1A XPL cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The clip is useful to keep the light secured in your pocket.
- Package contents
The performance of the Lumintop FW1A XPL flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Lumintop FW1A XPL, then don’t hesite and signal the problem to us.
Lumintop FW1A XPL (FW1AX) pictures
If there’s information about the Lumintop FW1A XPL that you would like to see on this site, then write to our firstname.lastname@example.org address.