
Jetbeam Mini One (2020) review
The Jetbeam Mini One (MINIONE) released in 2020. It uses Cree XP-G3 LED, TIR reflector and integrated 120 mAh Li-Ion battery. The powerful emitter in this flashlight provides up to 500 lm output, 1800 cd intensity, and a beam distance of 85 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The Mini One flashlight is rechargeable easily via USB port.
Table of contents:
Jetbeam Mini One (MINIONE) specifications
- Brand
- Jetbeam
- Name
- Mini One
- Type
- MINIONE
- Rating
- Launch
- 2020
- Form
- flashlight
Body
- Weight
- 29 g
- Length
- 54.3 mm
- Body diameter
- 13.2 mm
- Head diameter
- 14.6 mm
- Material
- stainless steel
- Colors
- silver
System
The emitter of Mini One manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- Cree XP-G3 LED
- Color temperature
- 6500 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 500 lm
- Intensity
- 1800 cd
- Throw
- 85 m
- CD/LM factor
- 3.6
Software
The Mini One has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature. It has auxiliary LEDs which make it really nice looking.
- Battery
- integrated 120 mAh Li-Ion battery
- Battery indicator
- yes
- Charger port
- USB Type-C
- LVP
- yes
- Thermal regulation
- no
- Protection
- IPx8
- Impact resistance
- 1.5 m
- AUX LEDs
- yes
- Magnetic
- no
- Specials
- UV light
green light
red light
The performance of the Jetbeam Mini One flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Jetbeam Mini One, then don’t hesite and signal the problem to us.
Jetbeam Mini One (MINIONE) pictures

If there’s information about the Jetbeam Mini One that you would like to see on this site, then write to us.