Imalent DX80 (2017) review
The Imalent DX80 (DX80) released in 2017. It uses 8 x Cree XHP70.2 LEDs, OP reflector and 8 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 32000 lm output, 162600 cd intensity, and a beam distance of 806 m.
This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Imalent DX80 (DX80) specifications
- Brand
- Imalent
- Name
- DX80
- Type
- DX80
- Rating
- Launch
- 2017
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 1204 g
- Length
- 213 mm
- Body diameter
- 50 mm
- Head diameter
- 92 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of DX80 manufactured by Cree, a US-based LED manufacturing company. The DX80 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Emitter
- 8 x Cree XHP70.2 LEDs
- Color temperature
- 6500 K
- Reflector
- OP
- Lens
- toughtened AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 32000 lm
- Intensity
- 162600 cd
- Throw
- 806 m
- CD/LM factor
- 5.08
Software
The DX80 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- Modes
- 6 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 8 x 18650 Li-Ion batteries
- Battery indicator
- yes
- Charger port
- yes
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
8 x 18650 batteries
lanyard
nylon holster
wall adapter
The performance of the Imalent DX80 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Imalent DX80, then don’t hesite and signal the problem to us.
Imalent DX80 (DX80) pictures
If there’s information about the Imalent DX80 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.