
Imalent DM35 (2019) review
The Imalent DM35 (DM35) released in 2019. It uses Cree XHP35 HI LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 2000 lm output, 50960 cd intensity, and a beam distance of 451 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Imalent DM35 (DM35) specifications
- Brand
- Imalent
- Name
- DM35
- Type
- DM35
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 87 g
- Length
- 115 mm
- Body diameter
- 25.6 mm
- Head diameter
- 33 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of DM35 manufactured by Cree, a US-based LED manufacturing company. The DM35 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XHP35 HI LED
- Color temperature
- 5000 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 2000 lm
- Intensity
- 50960 cd
- Throw
- 451 m
- CD/LM factor
- 25.48
Software
The DM35 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. The DM35 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The DM35 is magnetic so that the flashlight can be attached to some metallic surfaces.
- Battery
- 1 x 21700 Li-Ion battery
- Battery indicator
- yes
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- yes
- Specials
- red night light
Accessories
It comes with a battery. The battery must be fully charged before you first use your DM35. The clip is useful to keep the light secured in your pocket.
- Package contents
- 21700 battery with microUSB
clip
The performance of the Imalent DM35 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Imalent DM35, then don’t hesite and signal the problem to us.
Imalent DM35 (DM35) pictures

If there’s information about the Imalent DM35 that you would like to see on this site, then write to us.