Fitorch P30RGT (2018) review
The Fitorch P30RGT (P30RGT) released in 2018. It uses Cree XP-L HI LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1180 lm output, 23300 cd intensity, and a beam distance of 305 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The P30RGT flashlight is rechargeable easily via USB port.
Table of contents:
Fitorch P30RGT (P30RGT) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 130 g
- 143 mm
- Body diameter
- 25.4 mm
- Head diameter
- 35 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of P30RGT manufactured by Cree, a US-based LED manufacturing company. The P30RGT has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XP-L HI LED
- AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1180 lm
- 23300 cd
- 305 m
- CD/LM factor
The P30RGT has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The P30RGT is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The P30RGT flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- powerbank function
It comes with a battery. The battery must be fully charged before you first use your P30RGT. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery
spare rubber cover
The performance of the Fitorch P30RGT flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fitorch P30RGT, then don’t hesite and signal the problem to us.
Fitorch P30RGT (P30RGT) pictures
If there’s information about the Fitorch P30RGT that you would like to see on this site, then write to our firstname.lastname@example.org address.