Fitorch MR26 (2018) review
The Fitorch MR26 (MR26) released in 2018. It uses Cree XHP35 HD LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 18600 lm output, 23360 cd intensity, and a beam distance of 306 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The MR26 flashlight is rechargeable easily via USB port.
Table of contents:
Fitorch MR26 (MR26) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
|Body diameter||25.4 mm|
|Head diameter||35 mm|
|Material||aluminium alloy with HAIII hard-anodized finish|
The emitter of MR26 manufactured by Cree, a US-based LED manufacturing company. The MR26 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
|Emitter||Cree XHP35 HD LED|
|Color temperature||6500 K|
|Lens||toughtened AR coated glass|
|Switch||mechanical rear, mode pedal rear|
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
The MR26 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The MR26 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
|Battery||1 x 18650 Li-Ion battery|
It comes with a battery. The battery must be fully charged before you first use your MR26. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
|Package contents||18650 battery|
4 color filters
The performance of the Fitorch MR26 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fitorch MR26, then don’t hesite and signal the problem to us.
Fitorch MR26 (MR26) pictures
Fitorch MR26 (MR26) comparisons
According to our statistics, the Fitorch MR26 flashlight was most often compared on our site with the following flashlights.
Manker PL21 XP-G3
Haikelite MT09R XHP35
If there’s information about the Fitorch MR26 that you would like to see on this site, then write to us.