Fenix E35 V3.0 (2020) review
The Fenix E35 V3.0 (E35V30) released in 2020. It uses Luminus SST70 LED, TIR reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 3000 lm output, 14400 cd intensity, and a beam distance of 240 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Fenix E35 V3.0 (E35V30) specifications
- E35 V3.0
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 67 g
- 118 mm
- Head diameter
- 26.5 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of E35 V3.0 manufactured by Luminus, a US-based LED manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Luminus SST70 LED
- Color temperature
- 6500 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 3000 lm
- 14400 cd
- 240 m
- CD/LM factor
The E35 V3.0 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The E35 V3.0 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- Impact resistance
- 1.5 m
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your E35 V3.0. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 21700 battery with USB Type-C
USB Type-C cable
The performance of the Fenix E35 V3.0 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fenix E35 V3.0, then don’t hesite and signal the problem to us.
Fenix E35 V3.0 (E35V30) pictures
If there’s information about the Fenix E35 V3.0 that you would like to see on this site, then write to our firstname.lastname@example.org address.