
Fenix E30R (2019) review
The Fenix E30R (E30R) released in 2019. It uses Luminus SST40 LED, TIR reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1600 lm output, 10302 cd intensity, and a beam distance of 203 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available. The E30R flashlight is rechargeable easily via USB port.
Table of contents:
Fenix E30R (E30R) specifications
- Brand
- Fenix
- Name
- E30R
- Type
- E30R
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 51 g
- Length
- 99 mm
- Body diameter
- 21.5 mm
- Head diameter
- 25.4 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of E30R manufactured by Luminus, a US-based LED manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- Luminus SST40 LED
- Color temperature
- 6500 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1600 lm
- Intensity
- 10302 cd
- Throw
- 203 m
- CD/LM factor
- 6.44
Software
The E30R is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 5 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- magnetic USB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IP68
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your E30R. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery
clip
lanyard
magnetic USB charger cable
spare o-ring
The performance of the Fenix E30R flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fenix E30R, then don’t hesite and signal the problem to us.
Fenix E30R (E30R) pictures

If there’s information about the Fenix E30R that you would like to see on this site, then write to us.