FlashlightChart.com / Flashlights / Fenix / Fenix E28R (2020)

Fenix E28R (2020) review

2020
Luminus SST40 LED
1500 lm output
9433 cd intensity
1 x 18650 Li-Ion battery

The Fenix E28R (E28R) released in 2020. It uses Luminus SST40 LED, TIR reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1500 lm output, 9433 cd intensity, and a beam distance of 194 m.

It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available. The E28R flashlight is rechargeable easily via USB port.

Table of contents:

Fenix E28R (E28R) specifications

Brand
Fenix
Name
E28R
Type
E28R
Rating
Rated 4/5 based on 57 user votes.
Thanks for rating!
Invalid rating.
Launch
2020
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
66 g
Length
109 mm
Body diameter
22.6 mm
Head diameter
26.5 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black

System

The emitter of E28R manufactured by Luminus, a US-based LED manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.

Emitter
Luminus SST40 LED
Color temperature
6500 K
Reflector
TIR
Lens
TIR
Switch
electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
1500 lm
Intensity
9433 cd
Throw
194 m
CD/LM factor
6.29

Software

The E28R is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.

Modes
5 modes
Mode memory
no
Ramping mode
no
Strobe
yes
SOS/Beacon
no

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
1 x 18650 Li-Ion battery
Battery indicator
yes
Charger port
USB Type-C
LVP
yes
Thermal regulation
yes
Protection
IP68
Impact resistance
1 m
AUX LEDs
no
Magnetic
no

Accessories

It comes with a battery. The battery must be fully charged before you first use your E28R. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.

Package contents
18650 battery
USB Type-C cable
clip
lanyard
spare o-ring

The performance of the Fenix E28R flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fenix E28R, then don’t hesite and signal the problem to us.

Fenix E28R (E28R) pictures

If there’s information about the Fenix E28R that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information