
Fenix E01 V2.0 (2020) review
The Fenix E01 V2.0 (E01V20) released in 2020. It uses Cree XP-G2 S3 LED, TIR reflector and 1 x AAA battery. The powerful emitter in this flashlight provides up to 100 lm output, 306 cd intensity, and a beam distance of 35 m.
It uses a TIR lens to form the beam pattern. This light has 3 modes of lighting. This light does not have memory function.
Table of contents:
Fenix E01 V2.0 (E01V20) specifications
- Brand
- Fenix
- Name
- E01 V2.0
- Type
- E01V20
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 13 g
- Length
- 66.5 mm
- Body diameter
- 14 mm
- Head diameter
- 15 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
blue
System
The emitter of E01 V2.0 manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- Cree XP-G2 S3 LED
- Color temperature
- 6500 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- twisty
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 100 lm
- Intensity
- 306 cd
- Throw
- 35 m
- CD/LM factor
- 3.06
Software
- Modes
- 3 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The E01 V2.0 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.
- Battery
- 1 x AAA battery
- Battery indicator
- no
- Charger port
- no
- LVP
- no
- Thermal regulation
- no
- Protection
- IP68
- Impact resistance
- 1.5 m
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your E01 V2.0.
- Package contents
- AAA battery
keyring
spare o-ring
The performance of the Fenix E01 V2.0 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fenix E01 V2.0, then don’t hesite and signal the problem to us.
Fenix E01 V2.0 (E01V20) pictures

If there’s information about the Fenix E01 V2.0 that you would like to see on this site, then write to us.