Convoy L2 XHP50.2 (2017) review
The Convoy L2 XHP50.2 (L2XHP502) released in 2017. It uses Cree XHP50.2 LED, SMO reflector and 2 x 26650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 2400 lm output, 50000 cd intensity, and a beam distance of 447 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Convoy L2 XHP50.2 (L2XHP502) specifications
| Brand | Convoy |
|---|---|
| Name | L2 XHP50.2 |
| Type | L2XHP502 |
| Rating | |
| Launch | 2017 |
| Form | flashlight |
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
| Weight | 279 g |
|---|---|
| Length | 244 mm |
| Body diameter | 35 mm |
| Head diameter | 64.5 mm |
| Material | aluminium alloy with HAIII hard-anodized finish |
| Colors | black |
System
The emitter of L2 XHP50.2 manufactured by Cree, a US-based LED manufacturing company. The L2 XHP50.2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
| Emitter | Cree XHP50.2 LED |
|---|---|
| Color temperature | 3000 K, 4000 K, 5000 K, 6500 K |
| Reflector | SMO |
| Lens | AR coated glass |
| Switch | mechanical rear, forward clicky |
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
| Flux | 2400 lm |
|---|---|
| Intensity | 50000 cd |
| Throw | 447 m |
| CD/LM factor | 20.83 |
Software
The L2 XHP50.2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
| Modes | 4 modes |
|---|---|
| Mode memory | yes |
| Ramping mode | no |
| Strobe | no |
| SOS/Beacon | no |
Features
The L2 XHP50.2 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
| Battery | 2 x 26650 Li-Ion batteries |
|---|---|
| Battery indicator | no |
| Charger port | no |
| LVP | yes |
| Thermal regulation | no |
| Protection | IPx8 |
| AUX LEDs | no |
| Magnetic | no |
Accessories
| Package contents | tactical ring |
|---|
The performance of the Convoy L2 XHP50.2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Convoy L2 XHP50.2, then don’t hesite and signal the problem to us.
Convoy L2 XHP50.2 (L2XHP502) pictures
Convoy L2 XHP50.2 (L2XHP502) comparisons
According to our statistics, the Convoy L2 XHP50.2 flashlight was most often compared on our site with the following flashlights.
Convoy L2 XHP50.2
Nitecore Thumb Leo
Convoy L2 XHP50.2
Fitorch P30Z
Convoy L2 XHP50.2
Nextorch TA5
Convoy L2 XHP50.2
Okluma DC1 Brass
If there’s information about the Convoy L2 XHP50.2 that you would like to see on this site, then write to us.