Acebeam TK16 CU SST20 (2019) review
The Acebeam TK16 CU SST20 (TK16CUSST20) released in 2019. It uses 3 x Luminus SST20 LEDs, TIR reflector and 1 x 16340 Li-Ion battery. The powerful emitter in this flashlight provides up to 1250 lm output, 3570 cd intensity, and a beam distance of 119 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Acebeam TK16 CU SST20 (TK16CUSST20) specifications
- TK16 CU SST20
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 37.3 g
- 66.5 mm
- Body diameter
- 22 mm
- Head diameter
- 23 mm
- copper head, aluminium alloy body with HAIII hard-anodized finish
The emitter of TK16 CU SST20 manufactured by Luminus, a US-based LED manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- 3 x Luminus SST20 LEDs
- Color temperature
- 4000 K
- mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1250 lm
- 3570 cd
- 119 m
- CD/LM factor
The TK16 CU SST20 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TK16 CU SST20 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 5 modes
- Mode memory
- Ramping mode
The TK16 CU SST20 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 16340 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your TK16 CU SST20. The clip is useful to keep the light secured in your pocket.
- Package contents
- 16340 battery
2 x spare o-rings
spare rubber cover
The performance of the Acebeam TK16 CU SST20 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam TK16 CU SST20, then don’t hesite and signal the problem to us.
Acebeam TK16 CU SST20 (TK16CUSST20) pictures
If there’s information about the Acebeam TK16 CU SST20 that you would like to see on this site, then write to us.