Acebeam X10 (2020) review
The Acebeam X10 (X10) released in 2020. It uses 1 x Cree XHP35 HI LED, 9 x Samsung LH351D LEDs, TIR reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 7000 lm output, 54990 cd intensity, and a beam distance of 469 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Acebeam X10 (X10) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 207 g
- 141 mm
- Body diameter
- 25.4 mm
- Head diameter
- 60 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of X10 manufactured by Cree, a US-based LED manufacturing company. It has an AR coated lens.
- 1 x Cree XHP35 HI LED, 9 x Samsung LH351D LEDs
- Color temperature
- 5000 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 7000 lm
- 54990 cd
- 469 m
- CD/LM factor
The X10 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The X10 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your X10. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
21700 battery with USB Type-C
The performance of the Acebeam X10 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam X10, then don’t hesite and signal the problem to us.
Acebeam X10 (X10) pictures
If there’s information about the Acebeam X10 that you would like to see on this site, then write to us.