FlashlightChart.com / Flashlights / Acebeam / Acebeam TK16 CU Osram (2019)

Acebeam TK16 CU Osram (2019) review

2019
3 x Osram KW CSLNM1.TG LED
1300 lm output
28500 cd intensity
1 x 16340 Li-Ion battery

The Acebeam TK16 CU Osram (TK16CUO) released in 2019. It uses 3 x Osram KW CSLNM1.TG LED, TIR reflector and 1 x 16340 Li-Ion battery. The powerful emitter in this flashlight provides up to 1300 lm output, 28500 cd intensity, and a beam distance of 338 m.

It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Acebeam TK16 CU Osram (TK16CUO) specifications

Brand
Acebeam
Name
TK16 CU Osram
Type
TK16CUO
Rating
Rated 3/5 based on 154 user votes.
Thanks for rating!
Invalid rating.
Launch
2019
Form
flashlight

Body

Weight
37.3 g
Length
66.5 mm
Body diameter
22 mm
Head diameter
23 mm
Material
copper
Colors
copper

System

The emitter of TK16 CU Osram manufactured by Osram, a German lighting manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.

Emitter
3 x Osram KW CSLNM1.TG LED
Color temperature
6500 K
Reflector
TIR
Lens
TIR
Switch
mechanical rear

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
1300 lm
Intensity
28500 cd
Throw
338 m
CD/LM factor
21.92

Software

The TK16 CU Osram has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TK16 CU Osram is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.

Modes
5 modes
Mode memory
yes
Ramping mode
no
Strobe
yes
SOS/Beacon
no

Features

The TK16 CU Osram cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
1 x 16340 Li-Ion battery
Battery indicator
no
Charger port
no
LVP
yes
Thermal regulation
yes
Protection
IPx8
AUX LEDs
no
Magnetic
no

Accessories

It comes with a battery. The battery must be fully charged before you first use your TK16 CU Osram. The clip is useful to keep the light secured in your pocket.

Package contents
16340 battery
2 x spare o-rings
clip
spare rubber cover

The performance of the Acebeam TK16 CU Osram flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam TK16 CU Osram, then don’t hesite and signal the problem to us.

Acebeam TK16 CU Osram (TK16CUO) pictures

If there’s information about the Acebeam TK16 CU Osram that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information