Acebeam M50 Osram (2019) review
The Acebeam M50 Osram (M50O) released in 2019. It uses Osram KW CSLNM1.TG LED, TIR reflector and integrated 10150 Li-Ion battery. The powerful emitter in this flashlight provides up to 120 lm output, 1300 cd intensity, and a beam distance of 72 m.
It uses a TIR lens to form the beam pattern. This light has 2 modes of lighting. This light does not have memory function. The M50 Osram flashlight is rechargeable easily via USB port.
Table of contents:
Acebeam M50 Osram (M50O) specifications
- M50 Osram
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 11 g
- 43.3 mm
- Head diameter
- 13.9 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of M50 Osram manufactured by Osram, a German lighting manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Osram KW CSLNM1.TG LED
- Color temperature
- 6500 K
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 120 lm
- 1300 cd
- 72 m
- CD/LM factor
- 2 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- integrated 10150 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- Package contents
- 2 x spare o-rings
The performance of the Acebeam M50 Osram flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam M50 Osram, then don’t hesite and signal the problem to us.
Acebeam M50 Osram (M50O) pictures
If there’s information about the Acebeam M50 Osram that you would like to see on this site, then write to us.