Acebeam PT10 (2016) review
The Acebeam PT10 (PT10) released in 2016. It uses Cree XP-L HD LED, OP reflector and 2 x AAA batteries. The powerful emitter in this flashlight provides up to 360 lm output, 1046 cd intensity, and a beam distance of 65 m.
This light has 3 modes of lighting. This light does not have memory function.
Table of contents:
Acebeam PT10 (PT10) specifications
- Brand
- Acebeam
- Name
- PT10
- Type
- PT10
- Rating
- Launch
- 2016
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 20 g
- Length
- 132.8 mm
- Head diameter
- 14 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
desert tan
System
The emitter of PT10 manufactured by Cree, a US-based LED manufacturing company. The PT10 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Emitter
- Cree XP-L HD LED
- Color temperature
- 6500 K
- Reflector
- OP
- Lens
- toughtened AR coated glass
- Switch
- mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 360 lm
- Intensity
- 1046 cd
- Throw
- 65 m
- CD/LM factor
- 2.91
Software
- Modes
- 3 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The PT10 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.
- Battery
- 2 x AAA batteries
- Battery indicator
- no
- Charger port
- no
- LVP
- no
- Thermal regulation
- no
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The clip is useful to keep the light secured in your pocket.
- Package contents
- 2 x spare o-rings
clip
The performance of the Acebeam PT10 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam PT10, then don’t hesite and signal the problem to us.
Acebeam PT10 (PT10) pictures
If there’s information about the Acebeam PT10 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.