FlashlightChart.com
Acebeam

Acebeam L10 (2014) review

2014
Cree XP-G LED
120 lm output
240 cd intensity
1 x AA battery

The Acebeam L10 (L10) released in 2014. It uses Cree XP-G LED, SMO reflector and 1 x AA battery. The powerful emitter in this flashlight provides up to 120 lm output, 240 cd intensity, and a beam distance of 31 m.

This light has 4 modes of lighting. This light does not have memory function.

Table of contents:

Acebeam L10 (L10) specifications

BrandAcebeam
NameL10
TypeL10
Rating
Rated 4/5 based on 1028 user votes.
Launch2014
Formflashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight20 g
Length79 mm
Head diameter17 mm
Materialaluminium alloy with HAIII hard-anodized finish
Colorsblack
green
orange
silver

System

The emitter of L10 manufactured by Cree, a US-based LED manufacturing company. The L10 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

EmitterCree XP-G LED
Color temperature5000 K
ReflectorSMO
Lenstoughtened AR coated glass
Switchtwisty

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux120 lm
Intensity240 cd
Throw31 m
CD/LM factor2

Software

Modes4 modes
Mode memoryno
Ramping modeno
Strobeno
SOS/Beaconno

Features

The L10 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.

Battery1 x AA battery
Battery indicatorno
Charger portno
LVPno
Thermal regulationno
ProtectionIPx8
AUX LEDsno
Magneticno

Accessories

Package contentskey ring
spare o-ring

The performance of the Acebeam L10 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam L10, then don’t hesite and signal the problem to us.

Acebeam L10 (L10) pictures

Acebeam L10 / L10 photo Acebeam L10 / L10 photo Acebeam L10 / L10 photo Acebeam L10 / L10 photo
Acebeam L10 / L10

Acebeam L10 (L10) comparisons

According to our statistics, the Acebeam L10 flashlight was most often compared on our site with the following flashlights.

Acebeam L10
Acebeam L10
vs Nitecore CU6
Nitecore CU6
Acebeam L10
Acebeam L10
vs Nitecore EC20
Nitecore EC20
Acebeam L10
Acebeam L10
vs Pelican 2350
Pelican 2350
Acebeam L10
Acebeam L10
vs Nextorch TA3
Nextorch TA3

If there’s information about the Acebeam L10 that you would like to see on this site, then write to us.

FlashlightChart.com / Flashlights / Acebeam / Acebeam L10 (2014)
Back to Top