Acebeam L30 Gen II (2019) review
The Acebeam L30 Gen II (L30GENII) released in 2019. It uses Cree XHP70.2 LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 4000 lm output, 34800 cd intensity, and a beam distance of 373 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The L30 Gen II flashlight is rechargeable easily via USB port.
Table of contents:
Acebeam L30 Gen II (L30GENII) specifications
- L30 Gen II
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 168 g
- 162 mm
- Body diameter
- 25.4 mm
- Head diameter
- 48 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of L30 Gen II manufactured by Cree, a US-based LED manufacturing company. The L30 Gen II has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XHP70.2 LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 4000 lm
- 34800 cd
- 373 m
- CD/LM factor
The L30 Gen II has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The L30 Gen II is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your L30 Gen II. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 adapter
2 x spare o-rings
spare rubber cover
The performance of the Acebeam L30 Gen II flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam L30 Gen II, then don’t hesite and signal the problem to us.
Acebeam L30 Gen II (L30GENII) pictures
If there’s information about the Acebeam L30 Gen II that you would like to see on this site, then write to us.