
Acebeam L35 P70 (2020) review
The Acebeam L35 P70 (L35P70) released in 2020. It uses LatticePower P70 LED, TIR reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 4300 lm output, 881225 cd intensity, and a beam distance of 1877 m.
This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Acebeam L35 P70 (L35P70) specifications
- Brand
- Acebeam
- Name
- L35 P70
- Type
- L35P70
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 161 g
- Length
- 152 mm
- Body diameter
- 25.4 mm
- Head diameter
- 54.2 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
It has an AR coated lens.
- Emitter
- LatticePower P70 LED
- Color temperature
- 6500 K
- Reflector
- TIR
- Lens
- toughtened AR coated glass
- Switch
- electronic side, mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 4300 lm
- Intensity
- 881225 cd
- Throw
- 1877 m
- CD/LM factor
- 204.94
Software
The L35 P70 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The L35 P70 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 6 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. The L35 P70 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 21700 Li-Ion battery
- Battery indicator
- yes
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IP68
- Impact resistance
- 1 m
- AUX LEDs
- no
- Magnetic
- no
Accessories
The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- clip
lanyard
The performance of the Acebeam L35 P70 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam L35 P70, then don’t hesite and signal the problem to us.
Acebeam L35 P70 (L35P70) pictures

If there’s information about the Acebeam L35 P70 that you would like to see on this site, then write to us.