Acebeam EC60 (2016) review
The Acebeam EC60 (EC60) released in 2016. It uses Cree XHP35 HI LED, SMO reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2000 lm output, 90800 cd intensity, and a beam distance of 603 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The EC60 flashlight is rechargeable easily via USB port.
Table of contents:
Acebeam EC60 (EC60) specifications
- Brand
- Acebeam
- Name
- EC60
- Type
- EC60
- Rating
- Launch
- 2016
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 132 g
- Length
- 132 mm
- Body diameter
- 30 mm
- Head diameter
- 40 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of EC60 manufactured by Cree, a US-based LED manufacturing company. The EC60 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XHP35 HI LED
- Color temperature
- 6000 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 2000 lm
- Intensity
- 90800 cd
- Throw
- 603 m
- CD/LM factor
- 45.4
Software
The EC60 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The EC60 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 26650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- microUSB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your EC60. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
26650 battery
lanyard
microUSB cable
nylon holster
spare rubber cover
The performance of the Acebeam EC60 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam EC60, then don’t hesite and signal the problem to us.
Acebeam EC60 (EC60) pictures
If there’s information about the Acebeam EC60 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.