Acebeam H60 (2020) review

2020

1 x Osram KW CULPM1.TG LED, 8 x Sunlike LEDs

1250 lm output

5625 cd intensity

1 x 18650 Li-Ion battery

The Acebeam H60 (H60) released in 2020. It uses 1 x Osram KW CULPM1.TG LED, 8 x Sunlike LEDs, TIR reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this headlamp provides up to 1250 lm output, 5625 cd intensity, and a beam distance of 150 m.

It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The H60 flashlight is rechargeable easily via USB port.

Table of contents:

Acebeam H60 specifications
Acebeam H60 pictures
Acebeam H60 comparisons

Acebeam H60 (H60) specifications

Brand	Acebeam
Name	H60
Type	H60
Rating	★★★★★ Rated 4/5 based on 828 user votes.
Launch	2020
Form	headlamp

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.

Weight	57 g
Length	83 mm
Body diameter	26 mm
Head diameter	32.2 mm
Dimensions	83 x 32.2 x 26 mm
Material	aluminium alloy with HAIII hard-anodized finish
Colors	black

System

The emitter of H60 manufactured by Osram, a German lighting manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.

Emitter	1 x Osram KW CULPM1.TG LED, 8 x Sunlike LEDs
Color temperature	6500 K / 5000 K
Reflector	TIR
Lens	TIR
Switch	electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux	1250 lm
Intensity	5625 cd
Throw	150 m
CD/LM factor	4.5

Software

The H60 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.

Modes	5 modes
Mode memory	yes
Ramping mode	no
Strobe	no
SOS/Beacon	yes

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery	1 x 18650 Li-Ion battery
Battery indicator	yes
Charger port	USB Type-C
LVP	yes
Thermal regulation	yes
Protection	IPx8
Impact resistance	1 m
AUX LEDs	no
Magnetic	no

Accessories

Package contents	2 x spare o-rings USB Type-C cable headband

The performance of the Acebeam H60 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam H60, then don’t hesite and signal the problem to us.