Acebeam H20 (2016) review
The Acebeam H20 (H20) released in 2016. It uses Cree XP-L HI LED, OP reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this headlamp provides up to 1000 lm output, 1600 cd intensity, and a beam distance of 80 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Acebeam H20 (H20) specifications
- Brand
- Acebeam
- Name
- H20
- Type
- H20
- Rating
- Launch
- 2016
- Form
- headlamp
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 58 g
- Length
- 107 mm
- Body diameter
- 21 mm
- Head diameter
- 28 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
green
sand
System
The emitter of H20 manufactured by Cree, a US-based LED manufacturing company. The H20 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Emitter
- Cree XP-L HI LED
- Color temperature
- 6500 K
- Reflector
- OP
- Lens
- AR coated glass
- Switch
- electronic front
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1000 lm
- Intensity
- 1600 cd
- Throw
- 80 m
- CD/LM factor
- 1.6
Software
The H20 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The H20 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- no
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx6
- AUX LEDs
- no
- Magnetic
- no
Accessories
The clip is useful to keep the light secured in your pocket.
- Package contents
- 2 x spare o-rings
clip
headband
The performance of the Acebeam H20 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam H20, then don’t hesite and signal the problem to us.
Acebeam H20 (H20) pictures
If there’s information about the Acebeam H20 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.