Acebeam EC35 Gen II (2020) review
The Acebeam EC35 Gen II (EC35G2) released in 2020. It uses Samsung LH351D LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1100 lm output, 8100 cd intensity, and a beam distance of 180 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The EC35 Gen II flashlight is rechargeable easily via USB port.
Table of contents:
Acebeam EC35 Gen II (EC35G2) specifications
- EC35 Gen II
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 84.8 g
- 138.7 mm
- Body diameter
- 25.4 mm
- Head diameter
- 28.7 mm
- aluminium alloy with HAIII hard-anodized finish
The EC35 Gen II has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Samsung LH351D LED
- Color temperature
- 5000 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1100 lm
- 8100 cd
- 180 m
- CD/LM factor
The EC35 Gen II has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The EC35 Gen II is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The EC35 Gen II flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- USB Type-C
- Thermal regulation
- AUX LEDs
- powerbank function
The package includes a holster to safely store your flashlight. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
USB Type-C cable
spare rubber cover
The performance of the Acebeam EC35 Gen II flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam EC35 Gen II, then don’t hesite and signal the problem to us.
Acebeam EC35 Gen II (EC35G2) pictures
If there’s information about the Acebeam EC35 Gen II that you would like to see on this site, then write to us.