YLP Unicorn 1.0 (2019) review
The YLP Unicorn 1.0 (UNICORN10) released in 2019. It uses Samsung LH351D LED, TIR reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 850 lm output, 3906 cd intensity, and a beam distance of 125 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
YLP Unicorn 1.0 (UNICORN10) specifications
- Unicorn 1.0
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 67 g
- 102 mm
- Body diameter
- 25 mm
- Head diameter
- 28 mm
- aluminium alloy with HAIII hard-anodized finish
- desert tan
A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Samsung LH351D LED
- Color temperature
- 4200 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 850 lm
- 3906 cd
- 125 m
- CD/LM factor
The Unicorn 1.0 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The Unicorn 1.0 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The Unicorn 1.0 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The Unicorn 1.0 is magnetic so that the flashlight can be attached to some metallic surfaces.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- AUX LEDs
The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
The performance of the YLP Unicorn 1.0 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the YLP Unicorn 1.0, then don’t hesite and signal the problem to us.
YLP Unicorn 1.0 (UNICORN10) pictures
If there’s information about the YLP Unicorn 1.0 that you would like to see on this site, then write to our email@example.com address.