Xmund XD-FL13 (2020) review
The Xmund XD-FL13 (XDFL13) released in 2020. It uses Luminus SST40 LED, SMO reflector and 1 x 16340 Li-Ion battery. The powerful emitter in this flashlight provides up to 1000 lm output, 15625 cd intensity, and a beam distance of 250 m.
This light has 2 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available. The XD-FL13 flashlight is rechargeable easily via USB port.
Table of contents:
Xmund XD-FL13 (XDFL13) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 33 g
- 75 mm
- Body diameter
- 24 mm
- Head diameter
- 24 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of XD-FL13 manufactured by Luminus, a US-based LED manufacturer. The XD-FL13 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better.
- Luminus SST40 LED
- Color temperature
- 6500 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1000 lm
- 15625 cd
- 250 m
- CD/LM factor
The XD-FL13 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 2 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- 1 x 16340 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The performance of the Xmund XD-FL13 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Xmund XD-FL13, then don’t hesite and signal the problem to us.
Xmund XD-FL13 (XDFL13) pictures
If there’s information about the Xmund XD-FL13 that you would like to see on this site, then write to our firstname.lastname@example.org address.