Wuben TO50R (2019) review
The Wuben TO50R (TO50R) released in 2019. It uses 4 x Samsung LH351D LEDs, TIR reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 2800 lm output, 5329 cd intensity, and a beam distance of 146 m.
It uses a TIR lens to form the beam pattern. This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The TO50R flashlight is rechargeable easily via USB port.
Table of contents:
Wuben TO50R (TO50R) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 130 g
- 124.5 mm
- Head diameter
- 31 mm
- aluminium alloy with HAIII hard-anodized finish
A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- 4 x Samsung LH351D LEDs
- Color temperature
- 4500 K
- dual electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 2800 lm
- 5329 cd
- 146 m
- CD/LM factor
The TO50R has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TO50R is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 6 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your TO50R. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
The performance of the Wuben TO50R flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Wuben TO50R, then don’t hesite and signal the problem to us.
Wuben TO50R (TO50R) pictures
If there’s information about the Wuben TO50R that you would like to see on this site, then write to our firstname.lastname@example.org address.