Wuben L50 Osram P9 (2019) review
The Wuben L50 Osram P9 (L50OP9) released in 2019. It uses Osram P9 CW LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1200 lm output, 10000 cd intensity, and a beam distance of 200 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The L50 Osram P9 flashlight is rechargeable easily via USB port.
Table of contents:
Wuben L50 Osram P9 (L50OP9) specifications
- L50 Osram P9
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 90 g
- 138.6 mm
- Body diameter
- 26 mm
- Head diameter
- 26 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of L50 Osram P9 manufactured by Osram, a German lighting manufacturer. The L50 Osram P9 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Osram P9 CW LED
- Color temperature
- 6500 K
- AR coated glass
- mechanical rear, reverse clicky
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1200 lm
- 10000 cd
- 200 m
- CD/LM factor
The L50 Osram P9 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your L50 Osram P9. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery
2 x spare o-rings
The performance of the Wuben L50 Osram P9 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Wuben L50 Osram P9, then don’t hesite and signal the problem to us.
Wuben L50 Osram P9 (L50OP9) pictures
If there’s information about the Wuben L50 Osram P9 that you would like to see on this site, then write to us.