
Wuben E01 (2018) review
The Wuben E01 (E01) released in 2018. It uses Cree XP-G3 LED, SMO reflector and 1 x AAA battery. The powerful emitter in this flashlight provides up to 100 lm output, 400 cd intensity, and a beam distance of 40 m.
This light has 3 modes of lighting. This light does not have memory function.
Table of contents:
Wuben E01 (E01) specifications
- Brand
- Wuben
- Name
- E01
- Type
- E01
- Rating
- Launch
- 2018
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 18 g
- Length
- 82.5 mm
- Body diameter
- 15 mm
- Head diameter
- 15 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of E01 manufactured by Cree, a US-based LED manufacturing company. The E01 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XP-G3 LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- AR coated glass
- Switch
- mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 100 lm
- Intensity
- 400 cd
- Throw
- 40 m
- CD/LM factor
- 4
Software
It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 3 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- yes
Features
The E01 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.
- Battery
- 1 x AAA battery
- Battery indicator
- no
- Charger port
- no
- LVP
- no
- Thermal regulation
- no
- Protection
- IP68
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your E01.
- Package contents
- 2 x spare o-rings
AAA battery
key ring
The performance of the Wuben E01 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Wuben E01, then don’t hesite and signal the problem to us.
Wuben E01 (E01) pictures

If there’s information about the Wuben E01 that you would like to see on this site, then write to us.