Warsun 3010 (2019) review
The Warsun 3010 (3010) released in 2019. It uses Cree XM-L T6 LED, SMO reflector and integrated 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 800 lm output, 10000 cd intensity, and a beam distance of 200 m.
This light has 2 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available. The 3010 flashlight is rechargeable easily via USB port.
Table of contents:
Warsun 3010 (3010) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 200 g
- 110 mm
- Head diameter
- 28 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of 3010 manufactured by Cree, a US-based LED manufacturing company. The 3010 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better.
- Cree XM-L T6 LED
- Color temperature
- 6500 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 800 lm
- 10000 cd
- 200 m
- CD/LM factor
The 3010 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 2 modes
- Mode memory
- Ramping mode
This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- integrated 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- Package contents
- microUSB cable
The performance of the Warsun 3010 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Warsun 3010, then don’t hesite and signal the problem to us.
Warsun 3010 (3010) pictures
If there’s information about the Warsun 3010 that you would like to see on this site, then write to us.