Unilite PT-2 (2019) review
The Unilite PT-2 (PT2) released in 2019. It uses unspecified Cree LED, SMO reflector and 2 x AAA batteries. The powerful emitter in this flashlight provides up to 275 lm output, 2025 cd intensity, and a beam distance of 90 m.
This light has 2 modes of lighting. This light does not have memory function.
Table of contents:
Unilite PT-2 (PT2) specifications
- Brand
- Unilite
- Name
- PT-2
- Type
- PT2
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 65 g
- Length
- 137 mm
- Body diameter
- 18 mm
- Head diameter
- 25 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of PT-2 manufactured by Cree, a US-based LED manufacturing company. The PT-2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- unspecified Cree LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- AR coated glass
- Switch
- mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 275 lm
- Intensity
- 2025 cd
- Throw
- 90 m
- CD/LM factor
- 7.36
Software
- Modes
- 2 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The PT-2 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.
- Battery
- 2 x AAA batteries
- Battery indicator
- no
- Charger port
- no
- LVP
- no
- Thermal regulation
- no
- Protection
- IP66
- AUX LEDs
- no
- Magnetic
- no
Accessories
The clip is useful to keep the light secured in your pocket.
- Package contents
- 2 x AAA batteries
clip
The performance of the Unilite PT-2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Unilite PT-2, then don’t hesite and signal the problem to us.
Unilite PT-2 (PT2) pictures
If there’s information about the Unilite PT-2 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.