Sofirn TK70 (2019) review
The Sofirn TK70 (TK70) released in 2019. It uses Cree XHP70.2 LED, SMO reflector and 2 x 26650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 5500 lm output, 58013 cd intensity, and a beam distance of 482 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Sofirn TK70 (TK70) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 625 g
- 252.7 mm
- Head diameter
- 73.5 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of TK70 manufactured by Cree, a US-based LED manufacturing company. The TK70 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XHP70.2 LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 5500 lm
- 58013 cd
- 482 m
- CD/LM factor
The TK70 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TK70 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The TK70 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 2 x 26650 Li-Ion batteries
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- Package contents
- 2 x spare o-rings
spare rubber cover
The performance of the Sofirn TK70 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Sofirn TK70, then don’t hesite and signal the problem to us.
Sofirn TK70 (TK70) pictures
If there’s information about the Sofirn TK70 that you would like to see on this site, then write to our email@example.com address.